Ricoh D131 Service Manual page 727

SP5000 Mode: SP5821 to SP5990
Remote ROM Update
When set to "1" allows reception of firmware data via the local port (IEEE
1284) during a remote ROM update. This setting is reset to zero after the
5856
machine is cycled off and on. Allows the technician to upgrade the firmware
using a parallel cable.
[0 to 1/1]
0: Not allowed, 1: Allowed
5857 Save Debug Log
On/Off (1:ON 0:OFF)
Switches the debug log feature on and off. The debug log cannot be captured
1
until this feature is switched on.
0: OFF, 1: ON
Target (2: HDD 3: SD)
Selects the storage device to save debug logs information when the
2
conditions set with SP5-858 are satisfied.
[ 2 to 3 / 2 / 1 /step]
2: HDD, 3: SD Card
Save to HDD
Saves the debug log of the input SC number in memory to the HDD.
5
A unique file name is generated to avoid overwriting existing file names on the
SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card.
Save to SD Card
6
Saves the debug log of the input SC number in memory to the SD card.
9 Copy HDD to SD Card (Latest 4 MB)
10 Copy HDD to SD Card (Latest 4 MB Any Key)
11 Erase HDD Debug Data
12 Erase SD Card Debug Data
13 Free Space on SD Card
D131/D132/D133 3-152
CTL
SM Appendix