Ricoh D131 Service Manual page 748

6115 Pre-stack Number
1 A4 LEF
2 LT LEF
3 B5 LEF
4 10.5"x7.25"
5 A4 SEF
6 LT SEF
7 B5 SEF
8 10.5*7.25
9 Other
6118 Jogger Off/On
1 A3 SEF
2 B4 SEF
3 A4 SEF
4 A4 LEF
5 LT LEF
6 B5 LEF
7 DLT SEF
8 LG SEF
9 LT SEF
10 LT LEF
11 HLT LEF
12 Other
SM Appendix
This SP sets the number of sheets sent to the pre-stack tray.
With this SP set to the default (3):
3 sheets are sent to the pre-stack tray.
When the 4th sheet feeds, the 4th sheet and 3 sheets from
the pre-stack tray are sent to the stapling tray together.
Note: You may need to adjust this setting or switch it off
when feeding thick or slick paper.
[0 to 4/3/1]
0: None
1: 1 sheet
2: 2 sheets
3: 3 sheets
4: 4 sheets
This SP switches the jogging operation of the output jogger
unit attached to the side of the finisher off and on.
[0 to 1/0/1] 0: Off, 1: On
Note: After installation of the Output Jogger Unit B703, this
SP must be set to "1" for the jogging motor to operate the
jogging fences.
3-173
SP6000 Peripherals
D131/D132/D133