Ricoh D131 Service Manual page 671

SP5000 Mode: SP5024 to SP5816
5212 Page Numbering
3 Duplex Printout Left/Right Position
Horizontally positions the page numbers printed on both sides during
duplexing.
[-10 to +10/1 mm]
0 is center, minus is left, + is right.
4 Duplex Printout High/Low Position
Vertically positions the page numbers printed on both sides during duplexing.
[-10 to +10/1 mm]
0 is center, minus is down, + is up.
5227 Page Numbering (Bates Stamp)
201 Allow Page No. Entry
This SP specifies the number of digits to display for the entry of the starting
page number.
[2 to 9/9/1]
202 Zero Surplus Setting
This setting determines whether page numbers are prefixed with excess zeros
when the number is smaller than the number of assigned digits. For example,
with this setting on and 3 digits have been specified, the number "3" appears as
"003". With this setting off, the number "3" will appear as a "3" without the
zeros.
[0 to 1/0/1] 0:No zero surplus 1:Zero surplus allowed
D131/D132/D133 3-96 SM Appendix