Pl 7.17 Hcf Tray 3 And 4 Assembly (W/O Tag 151) (2 Of 2) - Xerox WorkCentre 5790 Family Service Manual

PL 7.17 HCF Tray 3 and 4 Assembly
(W/O TAG 151) (2 of 2)
Item Part Description
1 – Tray 4 assembly (REF: PL 7.15
Item 2)
2 – Tray 3 assembly (REF: PL 7.15
Item 3)
3 049K00300 Tray 3 and 4 clamp kit
4 – Side clamp (2 off) (P/O PL 7.17
Item 3)
5 – Center clamp (P/O PL 7.17 Item 3)
6 604K18182 Tray 3 & 4 mylar retainer clip kit
7 – Retainer clip (Wide) (6 off) (P/O PL
7.17 Item 6)
8 – Retainer clip (Narrow) (2 off) (P/O
PL 7.17 Item 6)
9 – Not used
10 – Paper tray guide (Not Spared) (ADJ
7.1)
11 – Flexure spring (Not Spared)
12 009K02380 Top edge flexure spring
13 – Retaining clips (Not Spared)
14 019K06030 HCF Tray alignment clip kit
15 – Front clip (P/O PL 7.17 Item 14)
16 – Rear clip (P/O PL 7.17 Item 14)
17 – Alignment locking clip (P/O PL
31.12 Item 1)
18 807E47310 Elevator drives gear coupling (REP
7.4)
Xerox® WorkCentre® 5790 Family
May 2013
5-23
Parts Lists
PL 7.17