Rep 7.17 Tray 3 Feeder (3Tm); Rep 7.18 Tray 4 Feeder (3Tm) - Xerox DocuColor 2240 Service Manual

REP 7.17 Tray 3 Feeder (3TM)

Parts List on PL 15.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Pull out Tray 3.
2. Open the Left Cover (PL 15.10).
3. Remove the Tray 3 Feeder (Figure
2
Release the Wire Harness from the Clamp and disconnect the P/J
1
Remove
Screws (2)
3
Remove Screws (2) and
the Tray 4 Feeder
Figure 1 Removing the Tray 3 Feeder
Initial issue
DC 3535/2240/1632, WC M24
WARNING
1).

REP 7.18 Tray 4 Feeder (3TM)

Parts List on PL 15.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Pull out Tray 4.
2. Open the Left Cover (PL 15.10) and remove the Left Lower Cover
3. Remove the Tray 4 Feeder (Figure
2
Release the Wire Harness from the Clamp and disconnect the P/J
1
Remove
Screws (2)
3
Remove Screws (2) and
the Tray 4 Feeder
Figure 1 Removing the Tray 4 Feeder
09/03
4-67
WARNING
(REP 14.12).
1).
Repairs and Adjustments
REP 7.17, REP 7.18