Table of Contents
Advertisement
ADJ 7.1 Tray 3 and Tray 4 Paper Tray Guide Setting (W/O
TAG 151)
Parts List on
PL 7.17
Purpose
To adjust the paper tray guides in tray 3 and tray 4 for A4 or 8.5 x 11 inch paper.
Adjustment
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
14. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1.
Pull out the tray to be adjusted and remove the paper from the tray.
2.
Push in the retaining clips and remove the paper tray guide,
Figure 1 Remove the paper guide
Xerox® WorkCentre® 5790 Family
WARNING
PL 7.15 Item
20,
Retaining clips.
3.
To reset the paper tray guide:
•
Refer to
Figure 2
retaining clips.
•
Refer to
Figure 3
tion the retaining clips.
Figure
1.
May 2013
4-445
to set the paper tray guide to A4 paper size and reposition the
to set the paper tray guide to 8.5 x 11 inch paper size and reposi-
Figure 2 Set the paper guide to A4 size
Retaining clips.
Repairs/Adjustments
ADJ 7.1
Advertisement
Chapters
Table of Contents
