Databits - Edge-Core ECS4610-24F Management Manual

D S
EFAULT ETTING
There is no default line.
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Telnet is considered a virtual terminal connection and will be shown as
"VTY" in screen displays such as
communication parameters (e.g., databits) do not affect Telnet
connections.
E
XAMPLE
To enter console line mode, enter the following command:
Console(config)#line console
Console(config-line)#
R C
ELATED OMMANDS
show line (609)
show users (591)
This command sets the number of data bits per character that are

databits

interpreted and generated by the console port. Use the no form to restore
the default value.
S
YNTAX
databits {7 | 8}
no databits
7 - Seven data bits per character.
8 - Eight data bits per character.
D S
EFAULT ETTING
8 data bits per character
C M
OMMAND ODE
Line Configuration
C U
OMMAND SAGE
The databits command can be used to mask the high bit on input from
devices that generate 7 data bits with parity. If parity is being generated,
specify 7 data bits per character. If no parity is required, specify 8 data bits
per character.
| System Management Commands
C 24
HAPTER
show users. However, the serial
– 601 –
Line