Dhcp Server; Table 131: Dhcp Server Commands - Edge-Core ECS4610-24F Management Manual

| DHCP Commands
C 42
HAPTER

DHCP Server

DHCP S
ERVER
Split horizon is enabled
Console#
R C
ELATED OMMANDS
ip dhcp relay server (980)
This section describes commands used to configure client address pools for
the DHCP service.

Table 131: DHCP Server Commands

Command Function
ip dhcp excluded-address Specifies IP addresses that a DHCP server should not
assign to DHCP clients
ip dhcp pool Configures a DHCP address pool on a DHCP Server
service dhcp Enables the DHCP server feature on this switch
bootfile Specifies a default boot image for a DHCP client
client-identifier Specifies a client identifier for a DHCP client
*
default-router Specifies the default router list for a DHCP client
dns-server Specifies the Domain Name Server (DNS) servers
available to a DHCP client
domain-name Specifies the domain name for a DHCP client
Specifies the hardware address of a DHCP client
hardware-address *
Specifies the IP address and network mask to
host *
manually bind to a DHCP client
lease Sets the duration an IP address is assigned to a DHCP
client
netbios-name-server Configures NetBIOS Windows Internet Naming Service
(WINS) name servers available to Microsoft DHCP
clients
netbios-node-type Configures NetBIOS node type for Microsoft DHCP
clients
network Configures the subnet number and mask for a DHCP
address pool
next-server Configures the next server in the boot process of a
DHCP client
clear ip dhcp binding Deletes an automatic address binding from the DHCP
server database
show ip dhcp binding Displays address bindings on the DHCP server
show ip dhcp Dsplays DHCP address pools
* These commands are used for manually binding an address to a client.
– 982 –
Mode
GC
GC
GC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
PE
PE, NE
PE