Ip Dhcp Snooping Trust - Edge-Core ECS4610-24F Management Manual

| General Security Measures
C 28
HAPTER
DHCP Snooping
ip dhcp snooping
trust
When the DHCP snooping is globally disabled, DHCP snooping can still
◆
be configured for specific VLANs, but the changes will not take effect
until DHCP snooping is globally re-enabled.
When DHCP snooping is globally enabled, configuration changes for
◆
specific VLANs have the following effects:
If DHCP snooping is disabled on a VLAN, all dynamic bindings
■
learned for this VLAN are removed from the binding table.
E
XAMPLE
This example enables DHCP snooping for VLAN 1.
Console(config)#ip dhcp snooping vlan 1
Console(config)#
R C
ELATED OMMANDS
ip dhcp snooping (725)

ip dhcp snooping trust (730)

This command configures the specified interface as trusted. Use the no
form to restore the default setting.
S
YNTAX
[no] ip dhcp snooping trust
D S
EFAULT ETTING
All interfaces are untrusted
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
A trusted interface is an interface that is configured to receive only
◆
messages from within the network. An untrusted interface is an
interface that is configured to receive messages from outside the
network or fire wall.
Set all ports connected to DHCP servers within the local network or fire
◆
wall to trusted, and all other ports outside the local network or fire wall
to untrusted.
When DHCP snooping ia enabled globally using the
◆
command, and enabled on a VLAN with
command, DHCP packet filtering will be performed on any untrusted
ports within the VLAN according to the default status, or as specifically
configured for an interface with the no ip dhcp snooping trust
command.
– 730 –
ip dhcp snooping
ip dhcp snooping vlan