Username: guest
Password: [guest login password]
CLI session with the ECS4610-24F is opened.
To end the CLI session, enter [Exit].
Console>enable
Password: [privileged level password]
Console#
Configuration commands are privileged level commands used to modify
C
ONFIGURATION
switch settings. These commands modify the running configuration only
C
OMMANDS
and are not saved when the switch is rebooted. To store the running
configuration in non-volatile storage, use the copy running-config
startup-config command.
The configuration commands are organized into different modes:
Global Configuration - These commands modify the system level
◆
configuration, and include commands such as hostname and snmp-
server community.
Access Control List Configuration - These commands are used for
◆
packet filtering.
◆
Class Map Configuration - Creates a DiffServ class map for a specified
traffic type.
IGMP Profile - Sets a profile group and enters IGMP filter profile
◆
configuration mode.
DHCP Configuration - These commands are used to configure the DHCP
◆
server.
Interface Configuration - These commands modify the port
◆
configuration such as speed-duplex and negotiation.
Line Configuration - These commands modify the console port and
◆
Telnet configuration, and include command such as parity and
databits.
◆
Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
Policy Map Configuration - Creates a DiffServ policy map for multiple
◆
interfaces.
Router Configuration - These commands configure global settings for
◆
unicast and multicast routing protocols.
Time Range - Sets a time range for use by other functions, such as
◆
Access Control Lists.
| Using the Command Line Interface
C
22
HAPTER
– 573 –
Entering Commands