Logging Trap; Clear Log - Edge-Core ECS4610-24F Management Manual

R
ELATED
logging history (611)

logging trap (613)

clear log (613)

This command enables the logging of system messages to a remote server,
logging trap
or limits the syslog messages saved to a remote server based on severity.
Use this command without a specified level to enable remote logging. Use
the no form to disable remote logging.
S
YNTAX
logging trap [level level]
no logging trap [level]
level - One of the syslog severity levels listed in the table on
page
D
EFAULT
Disabled
Level 7
C
OMMAND
Global Configuration
C
OMMAND
Using this command with a specified level enables remote logging and
◆
sets the minimum severity level to be saved.
Using this command without a specified level also enables remote
◆
logging, but restores the minimum severity level to the default.
E
XAMPLE
Console(config)#logging trap 4
Console(config)#
This command clears messages from the log buffer.
clear log
S
YNTAX
clear log [flash | ram]
flash - Event history stored in flash memory (i.e., permanent
memory).
ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
D
EFAULT
Flash and RAM
C
C
OMMANDS
611. Messages sent include the selected level through level 0.
S
ETTING
M
ODE
U
SAGE
S
ETTING
– 613 –
| System Management Commands
24
HAPTER
Event Logging