Displaying Dynamic Or Local Arp Entries - Edge-Core ECS4610-24F Management Manual

D D
ISPLAYING YNAMIC
L ARP
OR OCAL
E
NTRIES
Figure 266: Configuring Static ARP Entries
To display static entries in the ARP cache:
Click IP, ARP.
1.
Select Configure Static Address from the Step List.
2.
Select Show from the Action List.
3.
Figure 267: Displaying Static ARP Entries
The ARP cache contains static entries, and entries for local interfaces,
including subnet, host, and broadcast addresses. However, most entries will
be dynamically learned through replies to broadcast messages. Use the IP >
ARP (Show Information) page to display dynamic or local entries in the ARP
cache.
CLI R
EFERENCES
"show arp" on page 1014
◆
W I
EB NTERFACE
To display all dynamic entries in the ARP cache:
Click IP, ARP.
1.
Select Show Information from the Step List.
2.
Click Dynamic Address.
3.
– 445 –
| General IP Routing
C 17
HAPTER
Address Resolution Protocol