Displaying Information On Nssa And Stub Areas - Edge-Core ECS4610-24F Management Manual

| Unicast Routing
C 20
HAPTER
Configuring the Open Shortest Path First Protocol (Version 2)
D
ISPLAYING
I
NFORMATION ON
NSSA S
AND TUB
A
REAS
Figure 339: Configuring Protocol Settings for a Stub
Use the Routing Protocol > OSPF > Area (Show Information) page to
protocol information on NSSA and Stub areas.
CLI R
EFERENCES
"show ip ospf" on page 1069
◆
P
ARAMETERS
These parameters are displayed in the web interface:
Process ID – Process ID as configured in the Network Area
◆
configuration screen (see
Area ID – Identifier for a not-so-stubby area (NSSA) or stub.
◆
SPF Runs – The number of times the Shortest Path First algorithim has
◆
been run for this area.
ABR Count – The number of Area Border Routers attached to this
◆
area.
◆ ASBR Count – The number of Autonomous System Boundary Routers
attaced to this area.
LSA Count – The number of new link-state advertisements that have
◆
been originated.
LSA Checksum Sum – The sum of the link-state advertisements' LS
◆
checksums contained in this area's link-state database.
W I
EB NTERFACE
To display information on NSSA and stub areas:
Click Routing Protocol, OSPF, Area.
1.
Select Show Information from the Action list.
2.
Select a Process ID.
3.
– 518 –
page 504).