Edge-Core ECS4610-24F Management Manual page 529

Configuring the Open Shortest Path First Protocol (Version 2)
Figure 349: Configuring Settings for All Interfaces Assigned to a VLAN
To configure interface settings for a specific area assigned to a VLAN:
Click Routing Protocol, OSPF, Interface.
1.
Select Configure by Address from the Action list.
2.
Specify the VLAN ID, enter the address assigned to an area, and
3.
configure the required interface settings.
Click Apply.
4.
– 529 –
| Unicast Routing
C 20
HAPTER