Clear Ip Rip Route - Edge-Core ECS4610-24F Management Manual

24-port layer 3 gigabit ethernet switch

Hide thumbs Also See for ECS4610-24F:

Table of Contents

Interface Configuration (VLAN)

split-horizon poisoned

This example propagates routes back to the source using poison-reverse.

Console(config)#interface vlan 1

Console(config-if)#ip split-horizon poison-reverse

Console(config-if)#

This command clears specified data from the RIP routing table.

clear ip rip route

Split horizon never propagates routes back to an interface from which

they have been acquired.

Poison reverse propagates routes back to an interface port from which

they have been acquired, but sets the distance-vector metrics to

infinity. (This provides faster convergence.)

If split-horizon is disabled with the no rip ip split-horizon command,

and a loop occurs, the hop count for a route may be gradually

incremented to infinity (that is, 16) before the route is deemed

unreachable.

clear ip rip route {ip-address netmask | all | connected | ospf | rip

ip-address - IP address of a route entry.

netmask - Network mask for the route. This mask identifies the

network address bits used for the associated routing entries.

all - Deletes all entries from the routing table.

connected - Deletes all currently connected entries.

ospf - Deletes all entries learned through the Open Shortest Path

First routing protocol.

rip - Deletes all entries learned through the Routing Information

static - Deletes all static entries.

| IP Routing Commands

Routing Information Protocol (RIP)

Show Quick Links

Table of Contents