Show Ip Rip - Edge-Core ECS4610-24F Management Manual

This command displays information about RIP routes and configuration

show ip rip

settings. Use this command without any keywords to display all RIP routes.
S
YNTAX
show ip rip [interface [vlan vlan-id]]
interface - Shows RIP configuration settings for all interfaces or for
a specified interface.
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show ip rip
Codes: R - RIP, Rc - RIP connected, Rs - RIP static,
C - Connected, S - Static, O - OSPF
Network
Rc 192.168.0.0/24
Console#show ip rip interface vlan 1
Interface: vlan1
Routing Protocol: RIP
Receive RIPv1 and RIPv2 packets
Send RIPv1 Compatible
Passive interface: Disabled
Authentication mode: (None)
Authentication string: (None)
Split horizon: Enabled with Poisoned Reverse
IP interface address: 192.168.0.2/24
Console#
vlan-id - VLAN ID. (Range: 1-4093)
M
ODE
Next Hop
– 1041 –
| IP Routing Commands
C 45
HAPTER
Routing Information Protocol (RIP)
Metric From Interface Time
1 VLAN1 01:57