Displaying Global Settings For Sta - Edge-Core ECS4610-24F Management Manual

24-port layer 3 gigabit ethernet switch

Hide thumbs Also See for ECS4610-24F:

Table of Contents

| Spanning Tree Algorithm

Displaying Global Settings for STA

Figure 90: Configuring Global Settings for STA (MSTP)

Use the Spanning Tree > STA (Configure Global - Show Information) page

to display a summary of the current bridge STA information that applies to

the entire switch.

"show spanning-tree" on page 829

"show spanning-tree mst configuration" on page 830

The parameters displayed in the web interface are described in the

preceding section, except for the following items:

Bridge ID – A unique identifier for this bridge, consisting of the bridge

priority, the MST Instance ID 0 for the Common Spanning Tree when

spanning tree type is set to MSTP, and MAC address (where the address

is taken from the switch system).

Designated Root – The priority and MAC address of the device in the

Spanning Tree that this switch has accepted as the root device.

Show Quick Links

Table of Contents