Edge-Core ECS4610-24F Management Manual page 365

Table 22: Supported Notification Messages (Continued)
Model
swLoginSucceedTrap
swLoopbackDetectionTrap
networkAccessPortLinkDetectionTrap
swCpuUtiRisingNotification
swCpuUtiFallingNotification
swMemoryUtiRisingThresholdNotification 1.3.6.1.4.1.259.10.1.5.2.1.0.109 This notification indicates that the memory
swMemoryUtiFallingThresholdNotification 1.3.6.1.4.1.259.10.1.5.2.1.0.110 This notification indicates that the memory
* These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the SNMP
Configuration menu.
Level
1.3.6.1.4.1.259.10.1.5.2.1.0.67
1.3.6.1.4.1.259.10.1.5.2.1.0.95
1.3.6.1.4.1.259.10.1.5.2.1.0.96
1.3.6.1.4.1.259.10.1.5.2.1.0.107 This notification indicates that the CPU
1.3.6.1.4.1.259.10.1.5.2.1.0.108 This notification indicates that the CPU
W I
EB NTERFACE
To configure an SNMP group:
Click Administration, SNMP.
1.
Select Configure Group from the Step list.
2.
Select Add from the Action list.
3.
Enter a group name, assign a security model and level, and then select
4.
read, write, and notify views.
Click Apply
5.
Figure 203: Creating an SNMP Group
– 365 –
| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol
Group
This trap is sent when login succeeds via
console,telnet, or web.
This trap will be sent when loopback BPDUs
have been detected.
This trap is sent when a
networkAccessPortLinkDetection event is
triggered.
utilization crossed cpuUtiRisingThreshold.
utilization crossed cpuUtiFallingThreshold.
utilization crossed memoryUtiRisingThreshold.
utilization crossed memoryUtiFallingThreshold.