Edge-Core ECS4610-24F Management Manual page 703

Operation Mode– Shows if single or multiple hosts (clients) can
■
connect to an 802.1X-authorized port.
Port Control–Shows the dot1x mode on a port as auto, force-
■
authorized, or force-unauthorized
Intrusion Action– Sets the port response to intrusion when
■
authentication fails
Supplicant– MAC address of authorized client.
■
Authenticator PAE State Machine
◆
State – Current state (including initialize, disconnected, connecting,
■
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
Reauth Count– Number of times connecting state is re-entered.
■
Current Identifier– The integer (0-255) used by the Authenticator to
■
identify the current authentication session.
Backend State Machine
◆
State – Current state (including request, response, success, fail,
■
timeout, idle, initialize).
Request Count– Number of EAP Request packets sent to the
■
Supplicant without receiving a response.
Identifier (Server)– Identifier carried in the most recent EAP
■
Success, Failure or Request packet received from the Authentication
Server.
Reauthentication State Machine
◆
State – Current state (including initialize, reauthenticate).
E
XAMPLE
Console#show dot1x
Global 802.1X Parameters
System Auth Control
Authenticator Parameters:
EAPOL Pass Through
802.1X Port Summary
Port Type
-------- ------------- -------------- ------------------ ----------
1/1 Disabled
1/2 Disabled
.
.
.
1/23 Disabled
1/24 Enabled
802.1X Port Details
802.1X Authenticator is enabled on port 1/1
.
.
.
802.1X Authenticator is enabled on port 24
Reauthentication : Enabled
Reauth Period : 3600
– 703 –
C 27
HAPTER
(page
(page 695).
: Enabled
: Disabled
Operation Mode Control Mode
Single-Host ForceAuthorized
Single-Host ForceAuthorized
Single-Host ForceAuthorized
Single-Host Auto
| Authentication Commands
802.1X Port Authentication
698).
Authorized
N/A
N/A
Yes
Yes