Displaying Rp Mapping - Edge-Core ECS4610-24F Management Manual

Figure 374: Showing Information About the BSR
Use the Routing Protocol > PIM > SM (Show Information – Show RP
D RP
ISPLAYING
Mapping) page to display active RPs and associated multicast routing
M
APPING
entries.
CLI R
"show ip pim rp mapping" on page 1111
◆
P
ARAMETERS
These parameters are displayed in the web interface:
Groups – A multicast group address.
◆
RP Address – IP address of the RP for the listed multicast group.
◆
Information Source – RP that advertised the mapping, how the RP
◆
was selected (Static or Bootstrap), and the priority used in the bidding
process.
Uptime – The time this RP has been up and running
◆
Expire – The time before this entry will be removed.
◆
W I
EB
To display the RPs mapped to multicast groups:
Click Multicast, Multicast Routing, SM.
1.
Select Show Information from the Step list.
2.
Select Show RP Mapping from the Action list.
3.
EFERENCES
NTERFACE
– 563 –
| Multicast Routing
C 21
HAPTER
Configuring PIM for IPv4