| Security Measures
C
13
HAPTER
Configuring the Secure Shell
client to select either DES (56-bit) or 3DES (168-bit) for data
encryption.
The switch uses only RSA Version 1 for SSHv1.5 clients and DSA
N
:
OTE
Version 2 for SSHv2 clients.
Save Host-Key from Memory to Flash – Saves the host key from
◆
RAM (i.e., volatile memory) to flash memory. Otherwise, the host key
pair is stored to RAM by default. Note that you must select this item
prior to generating the host-key pair. (Default: Disabled)
W
I
EB
NTERFACE
To generate the SSH host key pair:
Click Security, SSH.
1.
Select Configure Host Key from the Step list.
2.
Select Generate from the Action list.
3.
Select the host-key type from the drop-down box.
4.
Select the option to save the host key from memory to flash if required.
5.
Click Apply.
6.
Figure 146: Generating the SSH Host Key Pair
To display or clear the SSH host key pair:
Click Security, SSH.
1.
Select Configure Host Key from the Step list.
2.
Select Show from the Action list.
3.
Select the host-key type to clear.
4.
Click Show.
5.
– 280 –