Edge-Core ECS4610-24F Management Manual page 562

| Multicast Routing
C 21
HAPTER
Configuring PIM for IPv4
Priority – Priority value used by this BSR candidate.
◆
Hash Mask Length – The number of significant bits used in the
◆
multicast group comparison mask by this BSR candidate.
Expire – The time before the BSR is declared down.
◆
Role – Candidate or non-candidate BSR.
◆
◆ State 7 – Operation state of BSR includes:
No information – No information is stored for this device.
■
Accept Any – The router does not know of an active BSR, and will
■
accept the first bootstrap message it sees as giving the new BSR's
identity and the RP-set.
Accept Preferred – The router knows the identity of the current
■
BSR, and is using the RP-set provided by that BSR. Only bootstrap
messages from that BSR or from a C-BSR with higher weight than
the current BSR will be accepted.
Candidate BSR – Bidding in election process.
■
Pending-BSR – The router is a candidate to be the BSR for the RP-
■
set. Currently, no other router is the preferred BSR, but this router
is not yet the elected BSR.
Elected BSR – Elected to serve as BSR.
■
W I
EB NTERFACE
To display information about the BSR:
Click Multicast, Multicast Routing, SM.
1.
Select Show Information from the Step list.
2.
Select Show BSR Router from the Action list.
3.
7. These parameters are based on RFC 5059.
– 562 –