Edge-Core ECS4610-24F Management Manual page 506

| Unicast Routing
C 20
HAPTER
Configuring the Open Shortest Path First Protocol (Version 2)
W I
EB NTERFACE
To define an OSPF area and the interfaces that operate within this area:
Click Routing Protocol, OSPF, Network Area.
1.
Select Add from the Action list.
2.
Configure a backbone area that is contiguous with all the other areas in
3.
the network, and configure an area for all of the other OSPF interfaces.
Click Apply
4.
Figure 328: Defining OSPF Network Areas Based on Addresses
To to show the OSPF areas and the assigned interfaces:
Click Routing Protocol, OSPF, Network Area.
1.
Select Show from the Action list.
2.
Figure 329: Showing OSPF Network Areas
To to show the OSPF process identifiers:
Click Routing Protocol, OSPF, Network Area.
1.
Select Show Process from the Action list.
2.
– 506 –