Ip Pim Override-Interval; Ip Pim Propagation-Delay - Edge-Core ECS4610-24F Management Manual

| Multicast Routing Commands
C 46
HAPTER
PIM Multicast Routing
ip pim override-
interval
ip pim propagation-
delay
This command configures the override interval, or the time it takes a
downstream router to respond to a lan-prune-delay message. Use the no
form to restore the default setting.
S
YNTAX
ip pim override-interval milliseconds
no ip pim override-interval
milliseconds - The time required for a downstream router to
respond to a lan-prune-delay message by sending back a Join
message if it wants to continue receiving the flow referenced in the
message. (Range: 500-6000 milliseconds)
D S
EFAULT ETTING
2500 milliseconds
C M
OMMAND ODE
Interface Configuration (VLAN)
C U
OMMAND SAGE
The override interval configured by this command and the propogation
delay configured by the
calculate the LAN prune delay. If a downstream router has group members
which want to continue receiving the flow referenced in a LAN prune delay
message, then the override interval represents the time required for the
downstream router to process the message and then respond by sending a
Join message back to the upstream router to ensure that the flow is not
terminated.
E
XAMPLE
Console(config-if)#ip pim override-interval 3500
Console(config-if)#
R C
ELATED OMMANDS

ip pim propagation-delay (1096)

ip pim lan-prune-delay (1095)
This command configures the propagation delay required for a LAN prune
delay message to reach downstream routers. Use the no form to restore
the default setting.
ip pim propagation-delay milliseconds
no ip pim propagation-delay
milliseconds - The time required for a lan-prune-delay message to
reach downstream routers attached to the same VLAN interface.
(Range: 100-5000 milliseconds)
– 1096 –
ip pim propagation-delay command are used to