Silent-Time; Speed - Edge-Core ECS4610-24F Management Manual

| System Management Commands
C 24
HAPTER
Line

silent-time

speed

E
XAMPLE
To set the password threshold to five attempts, enter this command:
Console(config-line)#password-thresh 5
Console(config-line)#
R C
ELATED OMMANDS
silent-time (606)
This command sets the amount of time the management console is
inaccessible after the number of unsuccessful logon attempts exceeds the
threshold set by the password-thresh
remove the silent time value.
S
YNTAX
silent-time [seconds]
no silent-time
seconds - The number of seconds to disable console response.
(Range: 0-65535; 0: 30 seconds)
D S
EFAULT ETTING
The default value is no silent-time.
C M
OMMAND ODE
Line Configuration (console only)
E
XAMPLE
To set the silent time to 60 seconds, enter this command:
Console(config-line)#silent-time 60
Console(config-line)#
R C
ELATED OMMANDS
password-thresh (605)
This command sets the terminal line's baud rate. This command sets both
the transmit (to terminal) and receive (from terminal) speeds. Use the no
form to restore the default setting.
S
YNTAX
speed bps
no speed
bps - Baud rate in bits per second.
(Options: 9600, 19200, 38400, 57600, 115200 bps, or auto)
– 606 –
command. Use the no form to