Displaying Dhcp Snooping Binding Information - Edge-Core ECS4610-24F Management Manual

24-port layer 3 gigabit ethernet switch

Hide thumbs Also See for ECS4610-24F:

Table of Contents

| Security Measures

DHCP Snooping

Set any ports within the local network or firewall to trusted.

Figure 181: Configuring the Port Mode for DHCP Snooping

Use the IP Service > DHCP > Snooping (Show Information) page to display

entries in the binding table.

"show ip dhcp snooping binding" on page 732

These parameters are displayed in the web interface:

MAC Address – Physical address associated with the entry.

IP Address – IP address corresponding to the client.

Lease Time (seconds) – The time for which this IP address is leased to

Type – Entry types include:

DHCP-Snooping – Dynamically snooped.

Static-DHCPSNP – Statically configured.

VLAN – VLAN to which this entry is bound.

Interface – Port or trunk to which this entry is bound.

Store – Writes all dynamically learned snooping entries to flash

memory. This function can be used to store the currently learned

dynamic DHCP snooping entries to flash memory. These entries will be

restored to the snooping table when the switch is reset. However, note

that the lease time shown for a dynamic entry that has been restored

from flash memory will no longer be valid.

Clear – Removes all dynamically learned snooping entries from flash

Show Quick Links

Chapters

Table of Contents