Edge-Core ECS4610-24F Management Manual page 157

Status – Enables or disables the specified VLAN.
◆
Show
VLAN ID – ID of configured VLAN.
◆
VLAN Name – Name of the VLAN.
◆
Status – Operational status of configured VLAN.
◆
W I
EB NTERFACE
To create VLAN groups:
Click VLAN, Static.
1.
Select Add from the Action list.
2.
Enter a VLAN ID or range of IDs.
3.
Mark Enable to configure the VLAN as operational.
4.
Click Apply.
5.
Figure 52: Creating Static VLANs
To modify the configuration settings for VLAN groups:
Click VLAN, Static.
1.
Select Modify from the Action list.
2.
Select the identifier of a configured VLAN.
3.
Modify the VLAN name or operational status as required.
4.
Click Apply.
5.
– 157 –
| VLAN Configuration
C 6
HAPTER
IEEE 802.1Q VLANs