Edge-Core ECS4610-24F Management Manual page 419

Show Detail
The following additional information is displayed on this page:
Group Address – IP multicast group address with subscribers directly
◆
attached or downstream from the switch, or a static multicast group
assigned to this interface.
Interface – The interface on the switch that has received traffic
◆
directed to the multicast group address.
Group Mode – In INCLUDE mode, reception of packets sent to the
◆
specified multicast address is requested only from those IP source
addresses listed in the source-list parameter. In EXCLUDE mode,
reception of packets sent to the given multicast address is requested
from all IP source addresses, except for those listed in the source-list
parameter and for any other sources where the source timer status has
expired.
Group Source List – A list of zero or more IP unicast addresses from
◆
which multicast reception is desired or not desired, depending on the
filter mode.
Source Address – The address of one of the multicast servers
■
transmitting traffic to the specified group.
V3 Expire – The time remaining before this entry will be aged out.
■
The V3 label indicates that the expire time is only provided for
sources learned through IGMP Version 3. (The default is 260
seconds.)
Forward – Indicates whether or not traffic will be forwarded from
■
the multicast source.
W I
EB NTERFACE
To display the current multicast groups learned through IGMP:
Click Multicast, IGMP, Group Information.
1.
Select Show Information from the Action list.
2.
Select a VLAN. The selected entry must be a configured IP interface.
3.
Figure 248: Displaying Multicast Groups Learned from IGMP (Information)
– 419 –
C
HAPTER
Layer 3 IGMP (Query used with Multicast Routing)
| Multicast Filtering
15