Ip Pim Max-Graft-Retries; Ip Pim State-Refresh Origination-Interval - Edge-Core ECS4610-24F Management Manual

| Multicast Routing Commands
C 46
HAPTER
PIM Multicast Routing
ip pim max-graft-
retries
ip pim state-refresh
origination-interval
E
XAMPLE
Console(config-if)#ip pim graft-retry-interval 9
Console(config-if)#
This command configures the maximum number of times to resend a Graft
message if it has not been acknowledged. Use the no form to restore the
default value.
S
YNTAX
ip pim max-graft-retries retries
no ip pim max-graft-retries
retries - The maximum number of times to resend a Graft.
(Range: 1-10)
D S
EFAULT ETTING
3
C M
OMMAND ODE
Interface Configuration (VLAN)
E
XAMPLE
Console(config-if)#ip pim max-graft-retries 5
Console(config-if)#
This command sets the interval between sending PIM-DM state refresh
control messages. Use the no form to restore the default value.
S
YNTAX
ip pim state-refresh origination-interval seconds
no ip pim max-graft-retries
seconds - The interval between sending PIM-DM state refresh
control messages. (Range: 1-100 seconds)
D S
EFAULT ETTING
60 seconds
C M
OMMAND ODE
Interface Configuration (VLAN)
C U
OMMAND SAGE
◆ The pruned state times out approximately every three minutes and the
entire PIM-DM network is reflooded with multicast packets and prune
messages. The state refresh feature keeps the pruned state from
– 1100 –