Edge-Core ECS4610-24F Management Manual page 318

| Security Measures
C 13
HAPTER
Configuring 802.1X Port Authentication
Intrusion Action – Sets the port's response to a failed authentication.
◆
Block Traffic – Blocks all non-EAP traffic on the port. (This is the
■
default setting.)
Guest VLAN – All traffic for the port is assigned to a guest VLAN.
■
The guest VLAN must be separately configured (See
VLAN Groups" on page
"Configuring Network Access for Ports" on page
Authenticator PAE State Machine
State – Current state (including initialize, disconnected, connecting,
◆
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
Reauth Count – Number of times connecting state is re-entered.
◆
Current Identifier – Identifier sent in each EAP Success, Failure or
◆
Request packet by the Authentication Server.
Backend State Machine
◆ State – Current state (including request, response, success, fail,
timeout, idle, initialize).
Request Count – Number of EAP Request packets sent to the
◆
Supplicant without receiving a response.
Identifier (Server) – Identifier carried in the most recent EAP
◆
Success, Failure or Request packet received from the Authentication
Server.
Reauthentication State Machine
State – Current state (including initialize, reauthenticate).
◆
W I
EB NTERFACE
To configure port authenticator settings for 802.1X:
Click Security, Port Authentication.
1.
Select Configure Interface from the Step list.
2.
Click Authenticator.
3.
Modify the authentication settings for each port as required.
4.
Click Apply
5.
– 318 –
156) and mapped on each port (See
"Configuring
266).