Edge-Core ECS4610-24F Management Manual page 359

P
ARAMETERS
These parameters are displayed in the web interface:
Remote Engine ID – The engine ID can be specified by entering 9 to
◆
64 hexadecimal characters (5 to 32 octets in hexadecimal format). If
an odd number of characters are specified, a trailing zero is added to
the value to fill in the last octet. For example, the value "123456789" is
equivalent to "1234567890".
◆ Remote IP Host – The IP address of a remote management station
which is using the specified engine ID.
W I
EB NTERFACE
To configure a remote SNMP engine ID:
Click Administration, SNMP.
1.
Select Configure Engine from the Step list.
2.
Select Add Remote Engine from the Action list.
3.
Enter an ID of a least 9 hexadecimal characters, and the IP address of
4.
the remote host.
Click Apply
5.
Figure 197: Configuring a Remote Engine ID for SNMP
To show the remote SNMP engine IDs:
Click Administration, SNMP.
1.
Select Configure Engine from the Step list.
2.
Select Show Remote Engine from the Action list.
3.
– 359 –
| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol