Specifying Udp Destination Ports - Edge-Core ECS4610-24F Management Manual

Figure 303: Enabling the UDP Helper
Use the IP Service > UDP Helper > Forwarding page to specify the UDP
S UDP
PECIFYING
destination ports for which broadcast traffic will be forwarded when the
D P
ESTINATION ORTS
UDP helper is enabled.
CLI R
◆
C
◆
P
These parameters are displayed in the web interface:
◆
W
To specify UDP destination ports for forwarding:
1.
2.
3.
4.
EFERENCES
"ip forward-protocol udp" on page 1015
U
OMMAND SAGE
Up to 100 UDP ports can be specified with this command for forwarding
to one or more remote servers.
ARAMETERS
Destination UDP Port – UDP application port for which UDP service
requests are forwarded. (Range: 1-65535)
The following UDP ports are inlcuded in the forwarding list when the
UDP helper is enabled, and a remote server address is configured:
BOOTP client
BOOTP server
Domain Name Service
IEN-116 Name Service
NetBIOS Datagram Server
NetBIOS Name Server
NTP
TACACS service
TFTP
I
EB NTERFACE
Click IP Service, UDP Helper, Forwarding.
Select Add from the Action list.
Enter a destination UDP port number for which service requests are to
be forwarded to a remote application server.
Click Apply.
– 479 –
C
HAPTER
Forwarding UDP Service Requests
port 67
port 68
port 53
port 42
port 138
port 137
port 37
port 49
port 69
| IP Services
19