Show Ip Ospf Border-Routers - Edge-Core ECS4610-24F Management Manual

Table 143: show ip ospf - display description (Continued)
Field
Number of
opaque AS LSA
Checksum
LSDB database
overflow limit
Number of LSA
originated
Number of LSA
received
Number of areas
attached to this
router
Number of
interfaces in this
area is
Number of fully
adjacent
neighbors in this
area is
Area has (no)
authentication
SPF algorithm
last executed
SPF algorithm
executed x
times
Number of LSA
Checksum
This command shows entries in the routing table that lead to an Area
show ip ospf
Border Router (ABR) or Autonomous System Boundary Router (ASBR).
border-routers
S
YNTAX
show ip ospf [process-id] border-routers
C
OMMAND
Privileged Exec
Description
Number of opaque link-state advertisements (Type 9, 10 and 11 LSAs) in
the link-state database. These LSAs advertise information about external
applications, and are only used by OSPF for the graceful restart process.
The sum of the LS checksums of opaque link-state advertisements
contained in the link-state database.
The maximum number of LSAs allowed in the external database.
The number of new link-state advertisements that have been originated.
The number of link-state advertisements that have been received.
The number of configured areas attached to this router.
The number of interfaces attached to this area
The number of neighbors for which the exchange of recognition protocol
messages has been completed and are now fully adjacent
Shows whether or not the authentication has been enabled
The last time the shortest path first algorithm was executed
The number of times the shortest path first algorithm has been executed
for this area
The number of new link-state advertisements that have been originated.
The sum of the link-state advertisements' LS checksums contained in this
area's link-state database.
process-id - The ID of the router process for which information will
be displayed. (Range: 1-65535)
M
ODE
– 1071 –
| IP Routing Commands
C 45
HAPTER
Open Shortest Path First (OSPFv2)