Configuring By Port Range; Displaying Connection Status - Edge-Core ECS4610-24F Management Manual

| Interface Configuration
C 5
HAPTER
Port Configuration
C
ONFIGURING BY
P R
ORT ANGE
D
ISPLAYING
C S
ONNECTION TATUS
Use the Interface > Port > General (Configure by Port Range) page to
enable/disable an interface, set auto-negotiation and the interface
capabilities to advertise, or manually fix the speed, duplex mode, and flow
control.
For more information on command usage and a description of the
parameters, refer to "Configuring by Port List" on page
CLI R
EFERENCES
"Interface Commands" on page 769
◆
W I
EB NTERFACE
To configure port connection parameters:
Click Interface, Port, General.
1.
Select Configure by Port Range from the Action List.
2.
Enter to range of ports to which your configuration changes apply.
3.
Modify the required interface settings.
4.
Click Apply.
5.
Figure 24: Configuring Connections by Port Range
Use the Interface > Port > General (Show Information) page to display the
current connection status, including link state, speed/duplex mode, flow
control, and auto-negotiation.
CLI R
EFERENCES
◆ "show interfaces status" on page 780
– 128 –
125.