Show Ip Arp Inspection Interface; Show Ip Arp Inspection Log - Edge-Core ECS4610-24F Management Manual

show ip arp
inspection interface
show ip arp
inspection log
E
XAMPLE
Console#show ip arp inspection configuration
ARP inspection global information:
Global IP ARP Inspection status : disabled
Log Message Interval
Log Message Number
Need Additional Validation(s)
Additional Validation Type
Console#
This command shows the trust status and ARP Inspection rate limit for
ports.
S
YNTAX
show ip arp inspection interface [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-24)
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show ip arp inspection interface ethernet 1/1
Port Number Trust Status
------------- --------------------
Eth 1/1 trusted
Console#
This command shows information about entries stored in the log, including
the associated VLAN, port, and address components.
C M
OMMAND ODE
Privileged Exec
E
XAMPLE
Console#show ip arp inspection log
Total log entries number is 1
Num VLAN Port Src IP Address
--- ---- ---- --------------
1 1 11 192.168.2.2
Console#
– 745 –
| General Security Measures
C 28
HAPTER
: 10 s
: 1
: Yes
: Destination MAC address
Limit Rate (pps)
------------------------------
150
Dst IP Address Src MAC Address
-------------- ---------------
192.168.2.1 00-04-E2-A0-E2-7C FF-FF-FF-FF-FF-FF
ARP Inspection
Dst MAC Address
--------------