Calendar Set; Show Calendar - Edge-Core ECS4610-24F Management Manual

24-port layer 3 gigabit ethernet switch

Hide thumbs Also See for ECS4610-24F:

Table of Contents

| System Management Commands

calendar set

This command sets the system clock. It may be used if there is no time

server on your network, or if you have not configured the switch to receive

signals from a time server.

calendar set hour min sec {day month year | month day year}

hour - Hour in 24-hour format. (Range: 0 - 23)

min - Minute. (Range: 0 - 59)

sec - Second. (Range: 0 - 59)

day - Day of month. (Range: 1 - 31)

august | september | october | november | december

year - Year (4-digit). (Range: 2001 - 2100)

Privileged Exec

Note that when SNTP is enabled, the system clock cannot be manually

This example shows how to set the system clock to 15:12:34, February

Console#calendar set 15:12:34 1 February 2002

This command displays the system clock.

Normal Exec, Privileged Exec

Console#show calendar

15:12:34 February 1 2002

Show Quick Links

Table of Contents