Edge-Core ECS4610-24F Management Manual page 757

24-port layer 3 gigabit ethernet switch
Hide thumbs Also See for ECS4610-24F:
Table of Contents

Advertisement

routers, such as non-default quality of service or "real-time" service
(see RFC 2460). (Range: 0-16777215)
next-header – Identifies the type of header immediately following
the IPv6 header. (Range: 0-255)
time-range-name - Name of the time range.
(Range: 1-30 characters)
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Extended IPv6 ACL
C
U
OMMAND
SAGE
All new rules are appended to the end of the list.
A flow label is assigned to a flow by the flow's source node. New flow
labels must be chosen pseudo-randomly and uniformly from the range
1 to FFFFF hexadecimal. The purpose of the random allocation is to
make any set of bits within the Flow Label field suitable for use as a
hash key by routers, for looking up the state associated with the flow.
A flow identifies a sequence of packets sent from a particular source to
a particular (unicast or multicast) destination for which the source
desires special handling by the intervening routers. The nature of that
special handling might be conveyed to the routers by a control protocol,
such as a resource reservation protocol, or by information within the
flow's packets themselves, e.g., in a hop-by-hop option. A flow is
uniquely identified by the combination of a source address and a non-
zero flow label. Packets that do not belong to a flow carry a flow label of
zero.
Hosts or routers that do not support the functions specified by the flow
label must set the field to zero when originating a packet, pass the field
on unchanged when forwarding a packet, and ignore the field when
receiving a packet.
Optional internet-layer information is encoded in separate headers that
may be placed between the IPv6 header and the upper-layer header in
a packet. There are a small number of such extension headers, each
identified by a distinct Next Header value. IPv6 supports the values
defined for the IPv4 Protocol field in RFC 1700, including these
commonly used headers:
0
: Hop-by-Hop Options
6
: TCP Upper-layer Header
17 : UDP Upper-layer Header
43 : Routing
44 : Fragment
51 : Authentication
50 : Encapsulating Security Payload
60 : Destination Options
– 757 –
| Access Control Lists
C
29
HAPTER
(RFC 2460)
(RFC 1700)
(RFC 1700)
(RFC 2460)
(RFC 2460)
(RFC 2402)
(RFC 2406)
(RFC 2460)
IPv6 ACLs

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents