Show Ip Igmp Interface - Edge-Core ECS4610-24F Management Manual

24-port layer 3 gigabit ethernet switch
Hide thumbs Also See for ECS4610-24F:
Table of Contents

Advertisement

| Multicast Filtering Commands
C
39
HAPTER
IGMP (Layer 3)
show ip igmp
interface
Table 122: show ip igmp groups detail - display description
Field
Description
In INCLUDE mode, reception of packets sent to the specified
Group mode
multicast address is requested only from those IP source
addresses listed in the source-list parameter. In EXCLUDE mode,
reception of packets sent to the given multicast address is
requested from all IP source addresses except for those listed in
the source-list parameter, and where the source timer status has
expired. Note that EXCLUDE mode does not apply to SSM
addresses.
The IP address of the source of the last membership report
Last Reporter
received for this multicast group address on this interface.
A list of zero or more IP unicast addresses from which multicast
Group Source List
reception is desired or not desired, depending on the filter mode.
The address of one of the multicast servers transmitting traffic to
Source Address
the specified group.
The time elapsed since this entry was created.
Uptime
The time remaining before this entry will be aged out. The V3 label
v3 Exp
indicates that the expire time is only provided for sources learned
through IGMP Version 3. (The default is 260 seconds.)
Indicates whether or not traffic will be forwarded from the
Fwd
multicast source.
This command shows multicast information for the specified interface.
S
YNTAX
show ip igmp interface [interface]
interface
vlan vlan-id - VLAN ID. (Range: 1-4093)
D
S
EFAULT
ETTING
None
C
M
OMMAND
ODE
Privileged Exec
E
XAMPLE
The following example shows the IGMP configuration for VLAN 1, as well as
the device currently serving as the IGMP querier for active multicast
services on this interface.
Console#show ip igmp interface vlan 1
Vlan 1 : up
IGMP
IGMP Version
IGMP Proxy
IGMP Unsolicited-report-interval : 400 sec
Robustness variable
Query Interval
Query Max Response Time
Last Member Query Interval
– 946 –
: Disabled
: 2
: Enabled
: 2
: 125 sec
: 100 (resolution in 0.1 sec)
: 10
(resolution in 0.1 sec)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents