Edge-Core ECS4610-24F Management Manual page 537

24-port layer 3 gigabit ethernet switch

Hide thumbs Also See for ECS4610-24F:

Table of Contents

Configuring the Open Shortest Path First Protocol (Version 2)

Transit Area – Common area the virtual link crosses to reach the

target router. This identifier is in the form of an IP address.

Router ID – Virtual neighbor's router ID.

Status – Indicates if the link is up or down.

Local Address – The IP address of ABR that serves as an endpoint

connecting the isolated area to the common transit area.

Remote Address – The IP address this virtual neighbor is using. The

neighbor must be an ABR at the other endpoint connecting the common

transit area to the backbone itself.

Hello Due – The number of seconds before the next hello message is

due. This time is determined by the Hello Interval which must be the

same for all router attached to a common network.

Adjacency State – The state of the virtual neighbor relationship:

Down – Connection down

Attempt – Connection down, but attempting contact (non-broadcast

Init – Have received Hello packet, but communications not yet

Two-way – Bidirectional communications established

ExStart – Initializing adjacency between neighbors

Exchange – Database descriptions being exchanged

Loading – LSA databases being exchanged

Full – Neighboring routers now fully adjacent

To display information about virtual links stored in the link state database:

Click Routing Protocol, OSPF, Information.

Click Virtual Link.

Select the process identifier.

Figure 359: Displaying Virtual Links Stored in the Link State Database

| Unicast Routing

Show Quick Links

Chapters

Table of Contents