Edge-Core ECS4610-24F Management Manual page 577

Table 30: Command Group Index (Continued)
Command Group Description
Multicast Filtering Configures IGMP multicast filtering, query, profile, and
proxy parameters; specifies ports attached to a
multicast router; also configures multicast VLAN
registration
Link Layer Discovery Configures LLDP settings to enable information
discovery about neighbor devices
Protocol
Domain Name Service Configures DNS services.
Dynamic Host Configures DHCP client, relay and server functions
Configuration Protocol
Router Redundancy Configures router redundancy to create primary and
backup routers
IP Interface Configures IP address for the switch interfaces; also
configures ARP parameters and static entries
IP Routing Configures static and dynamic unicast routing
Multicast Routing Configures multicast routing protocols PIM-DM and
PIM-SM
The access mode shown in the following tables is indicated by these
abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
DC (DHCP Server Configuration)
GC (Global Configuration)
IC (Interface Configuration)
IPC (IGMP Profile Configuration)
LC (Line Configuration)
MST (Multiple Spanning Tree)
NE (Normal Exec)
PE (Privileged Exec)
PM (Policy Map Configuration)
RC (Router Configuration)
VC (VLAN Database Configuration)
– 577 –
| Using the Command Line Interface
C 22
HAPTER
CLI Command Groups
Page
903
951
969
979
995
1005
1019
1085