Edge-Core ECS4610-24F Management Manual page 638

| SNMP Commands
C 25
HAPTER
D S
EFAULT ETTING
Default groups: public
8
readview - Every object belonging to the Internet OID space (1).
writeview - Nothing is defined.
notifyview - Nothing is defined.
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
A group sets the access policy for the assigned users.
◆
When authentication is selected, the MD5 or SHA algorithm is used as
◆
specified in the snmp-server user
When privacy is selected, the DES 56-bit algorithm is used for data
◆
encryption.
For additional information on the notification messages supported by
◆
this switch, see Table 22, "Supported Notification Messages," on
page 363. Also, note that the authentication, link-up and link-down
messages are legacy traps and must therefore be enabled in
conjunction with the
E
XAMPLE
Console(config)#snmp-server group r&d v3 auth write daily
Console(config)#
8. No view is defined.
9. Maps to the defaultview.
– 638 –
(read only), private (read/write)
9
command.
snmp-server enable traps command.