Edge-Core ECS4610-24F Management Manual page 324

24-port layer 3 gigabit ethernet switch
Hide thumbs Also See for ECS4610-24F:
Table of Contents

Advertisement

| Security Measures
C
13
HAPTER
IP Source Guard
If there is an entry with the same VLAN ID and MAC address, and
the type of entry is static IP source guard binding, then the new
entry will replace the old one.
If there is an entry with the same VLAN ID and MAC address, and
the type of the entry is dynamic DHCP snooping binding, then the
new entry will replace the old one and the entry type will be
changed to static IP source guard binding.
Only unicast addresses are accepted for static bindings.
P
ARAMETERS
These parameters are displayed in the web interface:
Port – The port to which a static entry is bound.
VLAN – ID of a configured VLAN (Range: 1-4093)
MAC Address – A valid unicast MAC address.
IP Address – A valid unicast IP address, including classful types A, B
or C.
W
I
EB
NTERFACE
To configure static bindings for IP Source Guard:
Click Security, IP Source Guard, Static Configuration.
1.
Select Add from the Action list.
2.
Enter the required bindings for each port.
3.
Click Apply
4.
Figure 176: Configuring Static Bindings for IP Source Guard
– 324 –

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents