Clear Counters; Show Interfaces Counters - Edge-Core ECS4610-24F Management Manual

| Interface Commands
C 30
HAPTER

clear counters

show interfaces
counters
This command clears statistics on an interface.
S
YNTAX
clear counters interface
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-24)
port-channel channel-id (Range: 1-32)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Privileged Exec
C U
OMMAND SAGE
Statistics are only initialized for a power reset. This command sets the base
value for displayed statistics to zero for the current management session.
However, if you log out and back into the management interface, the
statistics displayed will show the absolute value accumulated since the last
power reset.
E
XAMPLE
The following example clears statistics on port 5.
Console#clear counters ethernet 1/5
Console#
This command displays interface statistics.
S
YNTAX
show interfaces counters [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-24)
port-channel channel-id (Range: 1-32)
D S
EFAULT ETTING
Shows the counters for all interfaces.
– 778 –