Router Rip - Edge-Core ECS4610-24F Management Manual

Table 141: Routing Information Protocol Commands (Continued)
Command
ip rip receive version
ip rip receive-packet
ip rip send version
ip rip send-packet
ip rip split-horizon
clear ip rip route
show ip protocols rip
show ip rip
This command enables Routing Information Protocol (RIP) routing for all IP

router rip

interfaces on the router. Use the no form to disable it.
S
YNTAX
[no] router rip
C M
OMMAND
Global Configuration
D S
EFAULT ETTING
Disabled
C U
OMMAND
RIP is used to specify how routers exchange routing table information.
◆
◆ This command is also used to enter router configuration mode.
E
XAMPLE
Console(config)#router rip
Console(config-router)#
R C
ELATED OMMANDS
network (1029)
Function
Sets the RIP receive version to use on a network
interface
Configures the interface to receive of RIP packets
Sets the RIP send version to use on a network
interface
Configures the interface to send RIP packets
Enables split-horizon or poison-reverse loop
prevention
Clears specified data from the RIP routing table
Displays RIP process parameters
Displays information about RIP routes and
configuration settings
ODE
SAGE
– 1025 –
| IP Routing Commands
C 45
HAPTER
Routing Information Protocol (RIP)
Mode
IC
IC
IC
IC
IC
PE
PE
PE