Displaying Arp Inspection Statistics; Table 13: Arp Inspection Statistics - Edge-Core ECS4610-24F Management Manual

Figure 165: Configuring Interface Settings for ARP Inspection
Use the Security > ARP Inspection (Show Information - Show Statistics)
D ARP
ISPLAYING
page to display statistics about the number of ARP packets processed, or
I
NSPECTION
dropped for various reasons.
S
TATISTICS
CLI R
◆
P
ARAMETERS
These parameters are displayed in the web interface:

Table 13: ARP Inspection Statistics

Parameter
Received ARP packets before
ARP inspection rate limit
Dropped ARP packets in the
process of ARP inspection
rate limit
ARP packets dropped by
additional validation (IP)
ARP packets dropped by
additional validation
(Dst-MAC)
Total ARP packets processed
by ARP inspection
ARP packets dropped by
additional validation
(Src-MAC)
ARP packets dropped by ARP
ACLs
ARP packets dropped by
DHCP snooping
EFERENCES
"show ip arp inspection statistics" on page 746
Description
Count of ARP packets received but not exceeding the ARP
Inspection rate limit.
Count of ARP packets exceeding (and dropped by) ARP rate
limiting.
Count of ARP packets that failed the IP address test.
Count of packets that failed the destination MAC address
test.
Count of all ARP packets processed by the ARP Inspection
engine.
Count of packets that failed the source MAC address test.
Count of ARP packets that failed validation against ARP ACL
rules.
Count of packets that failed validation against the DHCP
Snooping Binding database.
– 307 –
| Security Measures
C 13
HAPTER
ARP Inspection