Edge-Core ECS4610-24F Management Manual page 407

When the access mode is set to deny, IGMP join reports are only
processed when the multicast group is not in the controlled range.
Add Multicast Group Range
Profile ID – Selects an IGMP profile to configure.
◆
Start Multicast IP Address – Specifies the starting address of a
◆
range of multicast groups.
End Multicast IP Address – Specifies the ending address of a range
◆
of multicast groups.
W I
EB NTERFACE
To create an IGMP filter profile and set its access mode:
Click Multicast, IGMP Snooping, Filtering.
1.
Select Add from the Action list.
2.
Enter the number for a profile, and set its access mode.
3.
Click Apply.
4.
Figure 238: Creating an IGMP Filtering Profile
To show the IGMP filter profiles:
Click Multicast, IGMP Snooping, Filtering.
1.
Select Show from the Action list.
2.
Figure 239: Showing the IGMP Filtering Profiles Created
– 407 –
| Multicast Filtering
C 15
HAPTER
Filtering and Throttling IGMP Groups