Show Ip Source-Guard; Show Ip Source-Guard Binding - Edge-Core ECS4610-24F Management Manual

C
OMMAND
◆
E
XAMPLE
This example sets the maximum number of allowed entries in the binding
table for port 5 to one entry.
Console(config)#interface ethernet 1/5
Console(config-if)#ip source-guard max-binding 1
Console(config-if)#
This command shows whether source guard is enabled or disabled on each
show ip source-
interface.
guard
C
OMMAND
Privileged Exec
E
XAMPLE
Console#show ip source-guard
Interface
---------
Eth 1/1
Eth 1/2
Eth 1/3
Eth 1/4
Eth 1/5
Eth 1/6
. .
.
This command shows the source guard binding table.
show ip source-
guard binding
S
YNTAX
C
OMMAND
Privileged Exec
U
SAGE
This command sets the maximum number of address entries that can
be mapped to an interface in the binding table, including both dynamic
entries discovered by DHCP snooping and static entries set by the
source-guard command.
M
ODE
Filter-type Max-binding
----------- -----------
DISABLED
DISABLED
DISABLED
DISABLED
SIP
DISABLED
show ip source-guard binding [dhcp-snooping | static]
dhcp-snooping - Shows dynamic entries configured with DHCP
Snooping commands (see
static - Shows static entries configured with the
binding command (see
M
ODE
– 737 –
| General Security Measures
C 28
HAPTER
5
5
5
5
1
5
page 724)
page 733).
IP Source Guard
ip
ip source-guard