Edge-Core ECS4610-24F Management Manual page 129

P
ARAMETERS
These parameters are displayed in the web interface:
Port – Port identifier.
◆
Type – Indicates the port type. (1000Base-T, 1000Base SFP)
◆
Name – Interface label.
◆
◆ Admin – Shows if the port is enabled or disabled.
Oper Status – Indicates if the link is Up or Down.
◆
Media Type – Media type used. (Options: Ports 1-2 – Copper-Forced,
◆
SFP-Forced, or SFP-Preferred-Auto, Ports 3-24 – SFP-Forced;
Default: Ports 1-2 – SFP-Preferred-Auto, Ports 3-24 – SFP-Forced)
◆ Autonegotiation – Shows if auto-negotiation is enabled or disabled.
Oper Speed Duplex – Shows the current speed and duplex mode.
◆
Oper Flow Control – Shows if flow control is enabled or disabled.
◆
W I
EB NTERFACE
To display port connection parameters:
Click Interface, Port, General.
1.
Select Show Information from the Action List.
2.
Figure 25: Displaying Port Information
– 129 –
| Interface Configuration
C 5
HAPTER
Port Configuration