Edge-Core ECS4610-24F Management Manual page 511

Configuring the Open Shortest Path First Protocol (Version 2)
Table 26: OSPF System Information (Continued)
Parameter Description
ABR Status Indicates if this router connects directly to networks in two or
(Area Border Router) more areas. An area border router runs a separate copy of the
Shortest Path First algorithm, maintaining a separate routing
database for each area.
ASBR Status Indicates if this router exchanges routing information with
(Autonomous System boundary routers in other autonomous systems to which it may
Boundary Router) be attached. If a router is enabled as an ASBR, then every other
router in the autonomous system can learn about external routes
from this device.
Restart Status Indicates if the OSPF process is in graceful-restart state.
Area Number The number of configured areas attached to this router.
Version Number The OSPF version number. The OSPF protocol implemented in this
device is based on RFC 2328 (Version 2). It also supports RFC
1583 (early Version 2) compatibility mode.
W I
EB NTERFACE
To show adminstrative settings and statistics for OSPF:
To display general settings for OSPF:
Click Routing Protocol, OSPF, System.
1.
Select Show from the Action list.
2.
Select a Process ID.
3.
Figure 333: Showing General Settings for OSPF
– 511 –
| Unicast Routing
C 20
HAPTER