Routing Information Protocol (Rip); Table 141: Routing Information Protocol Commands - Edge-Core ECS4610-24F Management Manual

| IP Routing Commands
C 45
HAPTER

Routing Information Protocol (RIP)

R I
OUTING NFORMATION
destination unreachable messages
time exceeded messages
parameter problem message
echo request messages
echo reply messages
redirect messages
timestamp request messages
timestamp reply messages
source quench messages
address mask request messages
address mask reply messages
UDP Statistics:
2 input
no port errors
other errors
output
TCP Statistics:
4698 input
input errors
5867 output
Console#
P (RIP)
ROTOCOL
.

Table 141: Routing Information Protocol Commands

Command Function
router rip Enables the RIP routing protocol
default-information Generates a default external route into an autonomous
originate system
default-metric Sets the default metric assigned to external routes
imported from other protocols
distance Defines an administrative distance for external routes
learned from other routing protocols
maximum-prefix Sets the maximum number of RIP routes allowed
neighbor Defines a neighboring router with which to exchange
information
network Specifies the network interfaces that are to use RIP
routing
passive-interface Stops RIP from sending routing updates on the
specified interface
redistribute Redistribute routes from one routing domain to
another
timers basic Sets basic timers, including update, timeout, garbage
collection
version Specifies the RIP version to use on all network
interfaces (if not already specified with a receive
version or send version command)
ip rip authentication Specifies the type of authentication used for RIP2
mode packets
ip rip authentication Enables authentication for RIP2 packets and specifies
string keys
– 1024 –
Mode
GC
RC
RC
RC
RC
RC
RC
RC
RC
RC
RC
IC
IC